The greens on holes 6 and 15 are not contoured correctly. I made copies of the strackaline green contours available when the 2023 PGA Championship was being previewed. I can't verify the accuracy of the Strackaline contours but they look right and are the best source of info I know of that is available.
The seam blends for the bunkers looks stretched out to me. Try about 1/2 of the V-wrap value used in the path map.
Seam blend texture properties look good but I think there is naming issue between the rough and 1st Cut. The extrusions used for the seam blends may be a little harsh, causing a shadow line and that may be what Ian is mentioning.
linkster wrote: ↑June 30th, 2025, 2:38 am
The greens on holes 6 and 15 are not contoured correctly. I made copies of the strackaline green contours available when the 2023 PGA Championship was being previewed. I can't verify the accuracy of the Strackaline contours but they look right and are the best source of info I know of that is available.
Oak-Hills-CC-East_Greens1-9.zip
Oak-Hills-CC-East_Greens10-18.zip
linkster,
The greens I used I downloaded in early 2024 from strakaline, not sure what the discrepancy is between the PGA and when I d/l'd them.
To me it looks like the green contours use the old 2018 lidar DEM (pre-renovation) with the new green lines (post-renovation).
OH_06_Old_Green.jpg (1.14 MiB) Viewed 11 times
OH_06_New_Green.jpg (1.09 MiB) Viewed 11 times
OH_15_Old_Green.jpg (1.05 MiB) Viewed 11 times
OH_15_New_Green.jpg (1.02 MiB) Viewed 11 times
I don't know if the Stracka Line contours I found on the internet are truly accurate, but they look more appropriate. It it tough working on courses that have recently been renovated.
