Page 1 of 1
Texture Alignment
Posted: June 13th, 2020, 2:39 pm
by SLucey
Silly question I know...but...
Up to this point, I never had any concerns with the direction a texture is laid down. I mean, who cares which way blades of grass are pointed, right?
Uh, it seems here, I now have to concern myself with the direction. Please see attached pic. If someone could be kind enough to explain how you manipulate the direction of faces so that the sea and the lava rock are properly aligned...I would be most grateful.
- Problem.jpg (745.14 KiB) Viewed 2816 times
Re: Texture Alignment
Posted: June 13th, 2020, 6:11 pm
by alarduran
Hi, SLucey.
Hope this screenshot helps:
- Image1.jpg (59.87 KiB) Viewed 2792 times
Re: Texture Alignment
Posted: June 13th, 2020, 9:24 pm
by SLucey
Yea, Gizmo Rotate. Okay, but, how do you use the tool to achieve proper alignment. When I left-click mouse and drag all its doing is scaling the highlighted faces - which I don't want to do - its not rotating the faces.
Re: Texture Alignment
Posted: June 13th, 2020, 10:16 pm
by alarduran
Type in the Z box the angle you want to rotate. Positive values are anti-clockwise. Negative values are clockwise. Look this texture:
- Image1.jpg (84.94 KiB) Viewed 2766 times
Now I rotated it 45 positive degrees:
- Image2.jpg (105.6 KiB) Viewed 2766 times
If you tick the relative option, the value you type in the Z box adds to the existing angle. I mean, if you tick relative and type 10 positive degrees, the texture will be rotated 45+10=55 degrees from the original:
- Image3.jpg (95.49 KiB) Viewed 2766 times
Re: Texture Alignment
Posted: June 14th, 2020, 1:31 am
by Danny D
SLucey wrote: ↑June 13th, 2020, 2:39 pm
Silly question I know...but...
Up to this point, I never had any concerns with the direction a texture is laid down. I mean, who cares which way blades of grass are pointed, right?
Uh, it seems here, I now have to concern myself with the direction. Please see attached pic. If someone could be kind enough to explain how you manipulate the direction of faces so that the sea and the lava rock are properly aligned...I would be most grateful.
Problem.jpg
At a glance, it appears to me as if the texture in that box looks like a seam blend texture, made up of 2 different textures. If that's the case, it should be assigned as a PATH mapping, and then flipped so the dirt is against the shore and the surf is toward the water.
Dan
Re: Texture Alignment
Posted: June 14th, 2020, 12:09 pm
by SLucey
Cha-ching! Thats what it was...I needed to PATH map it instead of PLANAR map it. Problem solved. Thanks guys.