Page 2 of 2

Re: Texture Blend

Posted: September 23rd, 2022, 3:39 pm
by derricksummers
:thumbup: Hi Sage. Made a start by taking a screen capture of all the bunkers so I can make them as near as possible to the ones you have done.
Screenshot_1.png
Screenshot_1.png (252.89 KiB) Viewed 1519 times
Derrick

Re: Texture Blend

Posted: September 23rd, 2022, 3:54 pm
by sagevanni
Hi Derrick,
Just a suggestion here.
You could also make a shape along the edge of all the bunkers. The shape will stay when you delete the verts for the bunkers and still have an outline of the original bunker shape.

Sage...... :cheers1:

Re: Texture Blend

Posted: September 23rd, 2022, 7:10 pm
by derricksummers
:dunno: I tried that method when I was testing and when I filled in the other rings the lines were still present. I will give it another go and see what comes up. If I can get the first bunker to come out O.K I can make a bit of progress. When I was doing the tests one of your sand textures was giving problems and another glitch I came across was when I set everything to zero with the painter the red circle remained very large and I had to switch off and try again
The motto were I worked was if at first you dont succed ( Leave it for the next shift ) :rofl: :notworthy:
Derrick

Re: Texture Blend

Posted: September 23rd, 2022, 11:26 pm
by derricksummers
:dunno: Hi Sage, I have completly redone the bunker with all new verts, In the first pic I have used my own textures, and in the next one the textures you are using. Thats the texture I mentioned that I was having trouble with. very confusing because if I use your vert layout with my textures the lines show up, but with my verts and your texture the lines are there again. With my verts and textures no lines, so I am going to see if its a vert or texture problem or both
:unsure: :wallbash: :dunno:
Derrick
Bed time now so tomorrows another day.
Screenshot_2.png
Screenshot_2.png (1.28 MiB) Viewed 1495 times
Screenshot_3.png
Screenshot_3.png (1.36 MiB) Viewed 1495 times

Re: Texture Blend

Posted: September 23rd, 2022, 11:28 pm
by Duck Hook
Ah ok, that explains it...lol
Good luck with the course...
:cheers1:
T

Re: Texture Blend

Posted: September 24th, 2022, 9:09 am
by sagevanni
Hi Derrick,
I like what you are doing, nice job... :smile: :cheers1:
Can't wait to see what you have come up with and finish the course.
Thanks very much for choosing to work on the course....!!!!!

Sage....

Re: Texture Blend

Posted: September 24th, 2022, 2:51 pm
by derricksummers
:dunno: Hi Sage Looks like I have hit a dead end, I switched on this morning and the lines were back even on the holes I had redone. I have changed all the textures to the ones I use, deleted the Lib file so there is no trace of your textures when the course is loaded but its made no difference.
Screenshot_4.png
Screenshot_4.png (758.16 KiB) Viewed 1463 times
:dunno: The only thing now left on the course is the verts in all the other bunkers that you have done, I dont think deleting all the bunkers is going to solve this problem what ever it is. Any suggestions enybody
:unsure: :wallbash: :helpsmilie:
Derrick

Re: Texture Blend

Posted: September 24th, 2022, 4:43 pm
by braden1308
Guys, as I said before. It is more of an APCD glitch than anything else, no real answer just headaches and wasted time trying to figure it out. Not to say there isn't an answer and someday maybe some one will come across it, but i'll live with it.