APCD 3D House Tutorial

Share your designing tips with other Designer's. Find answers to your problems using the APCD.
User avatar
Danny D
Posts: 1107
Joined: August 27th, 2019, 1:09 am
Location: SE Missouri

APCD 3D House Tutorial

Post by Danny D »

TITLE:
APCD 3D House Tutorial

DESCRIPTION:
The Beginners Guide to Building a Simple 3D House

by Dan DeShaney

A 12 part series of videos describing how to create a simple 3D house in the APCD (Arnold Palmer Course Designer)

Part 1 - The Foundation 15:55 https://youtu.be/HvrjzM3KRMY
Part 2 - Going "OFF PLOT" 11:01 https://youtu.be/UoG2B8ayzMk
Part 3 - Shaping the House 13:10 https://youtu.be/mxIDmHGIh2A
Part 4 - Window & Door Placement 15:57 https://youtu.be/uYnZ6lsQM1g
Part 5 - Creating the Roof & Gutters 13:50 https://youtu.be/N-IIGmrEcLw
Part 6 - Painting the Trim 16:40 https://youtu.be/pYl4A5-5xds
Part 7 - Moving back "ON PLOT" 16:27 https://youtu.be/SU8zzLBtLaQ
Part 8 - Applying the Textures 17:26 https://youtu.be/_lvV_vgmHDI
Part 9 - Window & Door Textures 22:48 https://youtu.be/OMBWu0-Ezss

Shadow Removal Section
Part 10: Understanding your Goal 14:35 https://www.youtube.com/watch?v=uCwbQa8sar8
Part 11: Foundation Shadows First 16:35 https://www.youtube.com/watch?v=SmSRN-1QD4M
Part 12: House Shadow removal 13:25 https://youtu.be/RLjsnldXISw


1920x1080 Hi-resolution video
16:9 aspect ratio
60 FPS (frames per second)
MP4 video file using the MPEG-4 codec

Total Running time 187:46 (approx 3 hours and 8 minutes)
Completed Courses
Real Courses: The National Golf Club of Kansas City - Wakonda Club - Coeur d'Alene Resort Course
Fictitious Courses: Northern Lakes - Golfcom Tees
Southern Oaks - Hometown 9 hole real course with a fictitious back 9 added
User avatar
AJ Allen
Posts: 170
Joined: May 12th, 2020, 9:43 am
Location: Victoria Australia

Re: APCD 3D House Tutorial

Post by AJ Allen »

I have just discovered these and want to say TYVM for taking the timke to make them. I am just learning 3D stuff, and have watched the YT videos by Lez on building a simple building without shadows. Which was really helpful, but doesn't discuss taking the shape further and applying textures and so on. Which is what I need to learn.

Cheers, AJ
User avatar
Danny D
Posts: 1107
Joined: August 27th, 2019, 1:09 am
Location: SE Missouri

Re: APCD 3D House Tutorial

Post by Danny D »

AJ Allen wrote: May 24th, 2020, 9:31 am I have just discovered these and want to say TYVM for taking the timke to make them. I am just learning 3D stuff, and have watched the YT videos by Lez on building a simple building without shadows. Which was really helpful, but doesn't discuss taking the shape further and applying textures and so on. Which is what I need to learn.

Cheers, AJ
You're welcome AJ. Glad you find it useful. :tiphat:

Cheers, :cheers1:

Dan
Completed Courses
Real Courses: The National Golf Club of Kansas City - Wakonda Club - Coeur d'Alene Resort Course
Fictitious Courses: Northern Lakes - Golfcom Tees
Southern Oaks - Hometown 9 hole real course with a fictitious back 9 added
brooks2345
Posts: 120
Joined: September 17th, 2019, 5:24 pm

Re: APCD 3D House Tutorial

Post by brooks2345 »

Well done Dan for all your hard work. Found your tutorial fascinating - and your method of shadow removal works!!!!!

However, I still have a problem. I'm working on Ballybunion, and there are three caravan parks, a graveyard full of stones, and numerous houses - about 4-500 3D objects in all. If I go through that lot doing shadow removal for each one, I'll still be doing it this time next year! And there's also the shadows on the terrain as well. I've tried playing the course with things as they stand, but the 3d objects above are just an eyesore.

There surely must be a quicker way to remove shadows en masse. Anyway, I'll go on wrestling with the problem!

Cheers and thanks again for the tutorial.

John Brooks :mad:
User avatar
Danny D
Posts: 1107
Joined: August 27th, 2019, 1:09 am
Location: SE Missouri

Re: APCD 3D House Tutorial

Post by Danny D »

brooks2345 wrote: July 31st, 2020, 10:11 pm Well done Dan for all your hard work. Found your tutorial fascinating - and your method of shadow removal works!!!!!

However, I still have a problem. I'm working on Ballybunion, and there are three caravan parks, a graveyard full of stones, and numerous houses - about 4-500 3D objects in all. If I go through that lot doing shadow removal for each one, I'll still be doing it this time next year! And there's also the shadows on the terrain as well. I've tried playing the course with things as they stand, but the 3d objects above are just an eyesore.

There surely must be a quicker way to remove shadows en masse. Anyway, I'll go on wrestling with the problem!

Cheers and thanks again for the tutorial.

John Brooks :mad:
Hi John. Thanks for the good words. Very much appreciated. Unfortunately when you are hand-creating 3D structures, shadows will always be a problem. I know of no way to remove them any faster than the method you are using. :dunno: In a situation where you have a lot of houses, I recommend that you plant 3D houses from the 2001 planting set. There are enough of them in the planting set that if you place them side-by-side, they reach far enough apart to where they don't repeat often enough that will you see a lot of obvious duplicates next to each other.

Sorry I don't have any better suggestions than that. Good luck,

Dan
Completed Courses
Real Courses: The National Golf Club of Kansas City - Wakonda Club - Coeur d'Alene Resort Course
Fictitious Courses: Northern Lakes - Golfcom Tees
Southern Oaks - Hometown 9 hole real course with a fictitious back 9 added
brooks2345
Posts: 120
Joined: September 17th, 2019, 5:24 pm

Re: APCD 3D House Tutorial

Post by brooks2345 »

Thanks Dan. Thought as much. No wonder Designers are shying away from this course! Houses from the 2001 set - yes, possibly. But that only leaves about 300 plus caravans! However, might it not be possible to create just one caravan off site (they're all pretty much the same) then add that to the planting set and re-use 300+ times?

Cheers

John Brooks :wallbash:
User avatar
Danny D
Posts: 1107
Joined: August 27th, 2019, 1:09 am
Location: SE Missouri

Re: APCD 3D House Tutorial

Post by Danny D »

brooks2345 wrote: August 1st, 2020, 1:15 pm Thanks Dan. Thought as much. No wonder Designers are shying away from this course! Houses from the 2001 set - yes, possibly. But that only leaves about 300 plus caravans! However, might it not be possible to create just one caravan off site (they're all pretty much the same) then add that to the planting set and re-use 300+ times?

Cheers

John Brooks :wallbash:
Yes, you can re-use the caravan, provided it's a 2D object. :smile:

Dan
Completed Courses
Real Courses: The National Golf Club of Kansas City - Wakonda Club - Coeur d'Alene Resort Course
Fictitious Courses: Northern Lakes - Golfcom Tees
Southern Oaks - Hometown 9 hole real course with a fictitious back 9 added
User avatar
Lez Marwick
Posts: 109
Joined: July 26th, 2020, 4:27 pm

Re: APCD 3D House Tutorial

Post by Lez Marwick »

brooks2345 wrote: August 1st, 2020, 1:15 pm However, might it not be possible to create just one caravan off site (they're all pretty much the same) then add that to the planting set and re-use 300+ times?
There was a tool made that allowed cloning of 3D created from terrain but only a few designers were given access to it. I'm sure Dr. Rob Miller used it on one of his courses to clone multiple 3D power lines that he made from terrain. He was a member on the Perfect Golf forum when I was there a few years ago, so he may still be contactable there. The tool was probably made by Andrew Jones, the creator/co-creator of the 1.07 mod and Links Extender, and the lead programer of Perfect Golf, so he may also be able to make the tool available.
my APCD designs - Ackerton Cross, Anakena Beach, Battley Peak, Elsham Woods, Fairview GC, Margaret's Bay, Masson Moor GC, Mowsbury Golf Club, The Dustin Trophy, Upham Hall Golf Club, Yarlswood Golf Club, Zeitsbergen
User avatar
Stephen Sullivan
Posts: 314
Joined: August 26th, 2019, 8:42 pm

Re: APCD 3D House Tutorial

Post by Stephen Sullivan »

I do have the APCD Mod with some instructions how to use it. No way I'm contacting Andrew Jones though, after he banned me from the PG forum :whistle:
User avatar
Danny D
Posts: 1107
Joined: August 27th, 2019, 1:09 am
Location: SE Missouri

Re: APCD 3D House Tutorial

Post by Danny D »

Lez Marwick wrote: August 1st, 2020, 3:43 pm
brooks2345 wrote: August 1st, 2020, 1:15 pm However, might it not be possible to create just one caravan off site (they're all pretty much the same) then add that to the planting set and re-use 300+ times?
There was a tool made that allowed cloning of 3D created from terrain but only a few designers were given access to it. I'm sure Dr. Rob Miller used it on one of his courses to clone multiple 3D power lines that he made from terrain. He was a member on the Perfect Golf forum when I was there a few years ago, so he may still be contactable there. The tool was probably made by Andrew Jones, the creator/co-creator of the 1.07 mod and Links Extender, and the lead programer of Perfect Golf, so he may also be able to make the tool available.
Hi Lez... I recall some talk about that tool here on the forums, but from what I remember, the instructions were kind of vague, and I don't remember anyone mentioning that they actually got it to work. :unsure:

Dan
Completed Courses
Real Courses: The National Golf Club of Kansas City - Wakonda Club - Coeur d'Alene Resort Course
Fictitious Courses: Northern Lakes - Golfcom Tees
Southern Oaks - Hometown 9 hole real course with a fictitious back 9 added
Post Reply